Custom ground cam,bigger injectors,cai,headers,ported heads,custom exhaust,102mm Fast intake with 90mm ported throttle body ,aftermarket MAss.. It bogs of line ,don't shift right and just not fast like it suppose too be for the HP....
Page 1 of 1
Need Awd Dyno With Hp Tuners In Minnesota ?
#1
Posted 25 December 2009 - 11:28 PM
Does anyone know where what shop I could go to that have AWD dyno and uses HP Tuners for (TBSS) in Minneapolis,Mn area Or even willing to drive 100 mile .. The shop that did all the engine work can't get the tune right and they lost the STOCK Tune.. So i need to tune on AWD with HP tuner..
Custom ground cam,bigger injectors,cai,headers,ported heads,custom exhaust,102mm Fast intake with 90mm ported throttle body ,aftermarket MAss.. It bogs of line ,don't shift right and just not fast like it suppose too be for the HP....
Custom ground cam,bigger injectors,cai,headers,ported heads,custom exhaust,102mm Fast intake with 90mm ported throttle body ,aftermarket MAss.. It bogs of line ,don't shift right and just not fast like it suppose too be for the HP....
#2
Posted 25 December 2009 - 11:30 PM
speed6, on Dec 25 2009, 10:28 PM, said:
Does anyone know where what shop I could go to that have AWD dyno and uses HP Tuners for (TBSS) in Minneapolis,Mn area Or even willing to drive 100 mile .. The shop that did all the engine work can't get the tune right and they lost the STOCK Tune.. So i need to tune on AWD with HP tuner..
Custom ground cam,bigger injectors,cai,headers,ported heads,custom exhaust,102mm Fast intake with 90mm ported throttle body ,aftermarket MAss.. It bogs of line ,don't shift right and just not fast like it suppose too be for the HP....
Custom ground cam,bigger injectors,cai,headers,ported heads,custom exhaust,102mm Fast intake with 90mm ported throttle body ,aftermarket MAss.. It bogs of line ,don't shift right and just not fast like it suppose too be for the HP....
If you find a place, let me know... good luck.
#3
Posted 26 December 2009 - 05:58 PM
I know there is one in SD. I don't know of one past that... And I couldn't even tell you where I heard the one in SD was.
WWW.ECIRS.ORG
95 Flamed DCM Impala SS: 6 speed, all show, no go-14.6@96 w/ 2.01 60'
96 DCM Impala SS-12.74@103 w/ 1.74 60' out of fuel
06 AWD TBSS-12.58@106 w/ 1.76 60'-Bolt On's....
Tuned by Tune Time Performance
95 Flamed DCM Impala SS: 6 speed, all show, no go-14.6@96 w/ 2.01 60'
96 DCM Impala SS-12.74@103 w/ 1.74 60' out of fuel
06 AWD TBSS-12.58@106 w/ 1.76 60'-Bolt On's....
Tuned by Tune Time Performance
#4
Posted 07 February 2010 - 10:02 AM
If you are going to be tuning on the dyno, be sure that it is a load bearing dyno.

Authorized EFILive and MAGNACHARGER Dealer.
Share this topic:
Page 1 of 1


Help
Back to top











